John-deere la105 Bedienungsanleitung PDF herunterladen (Seite 15)

Operating - 14

OPERATING

Operating

Daily Operating Checklist

❏ Test safety systems.

❏ Check tire pressure.

❏ Check fuel level.

❏ Check engine oil level.

❏ Remove grass and debris from engine compartment and muffler

area, and on top of mower deck, before and after operating machine.

❏ Clean air intake screen.

❏ Check area below machine for leaks.

Adjusting Seat

1. Sit in seat.

MX16558

2. Lift up on seat adjustment lever (A) on right side of seat.

3. Lean forward and slide seat forward or rearward to desired position. Do

not lean back on top of seat to push rearward.

4. Release seat adjustment lever to lock in position.

Lumbar Seat Adjustment (LA165, LA175)

• Turn lumbar seat adjustment dials (B) on either side of seat to adjust

firmness of seat.

Adjusting Cutting Height

Cutting height can be adjusted from approximately 25 - 100 mm (1 - 4 in.)

in 6.4 mm (1/4 in.) increments. When mower deck is in transport position,

cutting height is approximately 100 mm (4 in.).

Detents allow the adjustment lever to be positioned at each indicated

mower setting, as well as the mid-point between each setting.

1. Put attachment lift lever into the slot adjacent to desired cutting height.

2. Adjust mower deck wheels.

Transporting or Getting On and Off Machine

• Pull attachment lift lever all the way back to transport position or 100 mm

(4 in.) cutting height.

Checking Mower Deck Level

NOTE: Mower deck wheels should not contact the ground when

leveling the mower deck.

1. Park machine safely. (See Parking Safely in the SAFETY section.)

2. Inflate tires to the correct pressure.

3. Move mower lift handle to preferred cutting height.

4. Measure mower deck level (side-to-side).

MX4871

Picture Note: A convenient leveling gauge (A) (AM130907) is

available from your dealer.

a.Position mower blades as follows and measure from each outside

blade tip (B) to the level surface.

Mower Setting Approximate Cutting Height

1 25 mm (1 in.)

– 38 mm (1 1/2 in.)

2 50 mm (2 in.)

– 65 mm (2 1/2 in.)

3 75 mm (3 in.)

– 90 mm (3 1/2 in.)

4 (Transport) 100 mm (4 in.)

c CAUTION: Avoid injury! Rotating blades are dangerous.

Before adjusting or servicing mower:

• Disconnect spark plug wire(s) or battery negative (-) cable to

prevent engine from starting accidently.

• Always wear gloves when handling mower blades or working

near blades.

Mower Setting Approximate Cutting Height

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

John-deere la105 Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gartengeräte John-deere la105